081121Regular price $21,822.00
Wheatstone IP-16 and Mix Engine
Wheatstone IP-16 Digital Audio Control Surface
16 Fader. Includes Power Supply, ip88-3cb Console Blade
ip88cb Console Blade Mix Engine (p/n 011005)
with 8 mono (4 stereo) analog line inputs, 2 Mic preamps (patchable to 2 analog line inputs),
4 AES inputs, 4 AES outputs, 4 analog outputs, Cue and headphone outputs on RJ45 and 1/4” jack,
Control room and studio monitor outputs on XLRs, 12 programmable logic ports.
Upgrade from standard ip88-3cb Console Blade to ip88-3cb32. Doubles input capacity to 4 mic pre inputs, 16 analog inputs and 8 AES digital inputs. Outputs
double to 16 analog and 8 AES digital.
16-fader compact control surface
4 stereo program busses
LCD source name displays
A/B source selector on each input module
Guarded channel ON/OFF switches
Headphone output with built-in amplifier and level control
Four event switches
Control room and studio monitor outputs with independent source selectors and level controls
CUE bus with built-in amplifier and speaker
Three pairs of bright, 30-segment stereo bargraph meters
Six programmable buttons
Individual Channel Mix-Minus outputs with talkback interrupt
Source Selectable Studio Output with talkback interrupt
Uses the IP88CB Console Audio BLADE, WheatNet-IP compatible
Modular control surface design
We’ve built the IP-12/IP-16 (in New Bern, NC USA, by the way) to be easily accessed by you. No ‘one-surface, gotta take the whole thing apart construction’ here. If you need access to a channel, all it takes is two screws and you’re in. Makes it a breeze to service or simply swap out a module.
Source Select Any input can be called up on any channel on the IP-12/IP-16. This means the feed you’ve got plugged into input 7 on the back of the BLADE (or ANY BLADE) can also show up on channel 2…or any other channel. Same with any input! Not only that, you can assign a backup or different source to the same channel and switch on the fly by using the SOURCE A/B buttons. As if this isn’t cool enough by itself, think about the flexibility if/when you decide to link the IP-12/IP-16 up to a network. Imagine having any source on the network at your fingertips, with no patching.
Mix-Minus / Direct Outputs
Each fader has a dedicated Mix-Minus output (activated by the TB switch) that includes all active faders on its selected source bus, except for itself. These auto generated monaural Mix-Minus signals may be routed to feed telephone hybrids or other devices as required. Alternately, these outputs may be set to provide a separate direct output from that channel only, consisting of the source assigned to that channel. This is very useful for multitrack production work.
Dimensions 28.625”/73cm wide
(tabletop mount) 16.5”/42cm deep
5”/13cm high (rear)
1.75”/4.5cm high (front)
Documents:IP-12 / IP-16 Owner's Manual (BLADE-3)