Audio-Technica BPHS2C Headset Condsenser
Audio-Technica BPHS2C Headset Condsenser
Audio-Technica BPHS2C Headset Condsenser

Audio-Technica BPHS2C Headset Condsenser


Regular price $589.00

Audio-Technica BPHS2 Broadcast Stereo Headset with Condenser mic

Created especially for news and sports broadcasting, this rugged stereo headset offers highly intelligible and commanding vocal reproduction, along with a comfortable fit and excellent sound isolation.

Its low-profile, closed-back, on-ear design is based on the ATH-M60x professional monitor headphones and includes the same 45 mm large-aperture drivers, and premium, memory foam earpads and headband, giving users a high-fidelity headset thats built to last.

The headsets sleek cardioid condenser microphone keeps the pickup focused on the broadcasters voice, even in loud environments, and is tailored to reproduce that voice with a clear, articulate quality. 

The microphone sits at the end of a rigid boom with a strong, flexible gooseneck section that allows the microphone to be easily adjusted and then stay in place. The boom is also designed to swivel forward and back so that the headset can be worn with the mic positioned on either the right or left side.

The headset comes included with a 3.0 m (9.8') detachable cable (BPCB2) with a TA6F connector at the headset and, at the output end, a 3-pin XLRM-type connector for the microphone and a 6.3 mm (1/4") connector for the headphones. An unterminated version of the cable (BPCB3) is available separately.


  • Low-profile, closed-back, on-ear design provides excellent isolation and fit
  • Proprietary 45 mm large-aperture drivers (the same used in the ATH-M60x pro headphones) with rare earth magnets and copper-clad aluminum wire voice coils
  • Sleek cardioid condenser microphone with frequency response tailored for clear, articulate vocal reproduction
  • Carefully crafted using key metal components for lasting durability
  • Low-impedance design delivers high output level from any headphone output
  • Boom-mounted microphone can be positioned on the left or right side
  • Rigid boom with strong, flexible gooseneck section allows microphone to be adjusted and stay in place
  • Premium, memory foam earpads and headband allow headset to be worn comfortably for hours on end
  • Earpads and headband detach for easy replacement
  • 3.0 m (9.8') detachable cable (BPCB2) with TA6F connector at headset, and 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") connector (headphone) outputs
  • Unterminated detachable cable (BPCB3) is available separately
  • Also available: BPHS2C Stereo Broadcast Headset with unterminated BPCB3 cable (BPHS2C-UT),Stereo Broadcast Headset with hypercardioid dynamic microphone (BPHS2) and Single-Ear Broadcast Headset with hypercardioid dynamic microphone (BPHS2S)


Element Back electret condenser
Polar Pattern Cardioid
Frequency Response 60 - 15,000 Hz (@ 2 cm)
Open Circuit Sensitivity –57 dB (5.6 mV) (0 dB = 1 V/Pa, 1 kHz)
Maximum Input Sound Level 140 dB SPL (1 kHz THD1%)
Dynamic Range 106 dB (1 kHz at Max S.P.L.)
Signal-to-Noise Ratio 60 dB (1 kHz at 1 Pa, A-weighted)
Phantom Power Requirements 11 - 52V DC, 2 mA
Dimensions Height: 12.7 mm (0.5”),
Minimum width: 12 mm (0.47”)
Output Connector TB6M
Type Closed-back Dynamic (Headphone)
Cardioid Condenser (Microphone)
Driver Diameter 45 mm (Headphone)
Frequency Response 15-28,000 Hz (Headphone)
Maximum Input Power 1,600 mW at 1 kHz (Headphone)
Maximum Output 1,600 mW
Sensitivity 102 dB (Headphone)
Impedance 38 ohms (Headphone)
Weight 240 g (8.5 oz)
Cable Detachable 3.0 m (9.8') long cable with 6-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 3.5 mm (1/8") phone plug (headphone) outputs
Connector TB6M jack
Magnet Neodymium (Headphone)
Voice Coil Copper-clad aluminum wire
Microphone Type Cardioid Condenser
Accessories Included Pouch; 3 windscreens; cable clip; 6/3 mm (1/4") screw-on adapter



BPHS2C User Manual