Tascam SERIES-8P-DYNA Mic Preamp
Tascam SERIES-8P-DYNA Mic Preamp
Tascam SERIES-8P-DYNA Mic Preamp
Tascam SERIES-8P-DYNA Mic Preamp
Tascam SERIES-8P-DYNA Mic Preamp
Tascam SERIES-8P-DYNA Mic Preamp

Tascam SERIES-8P-DYNA Mic Preamp

Series8P-DYNA

<tc>Prix régulier</tc> $849.00
/

Tascam SERIES-8P-DYNA Microphone Preamplifier

8 channel mic preamplifier with analog compressor

With superb audio specifications and connectivity and featuring an outstanding microphone preamp, the TASCAM SERIES 8p Dyna is a great choice for both studio and stage. Housed in a rugged 1U rack-mount casing, its dual S/MUX optical ports make it a perfect expansion unit for a TASCAM SERIES 102i or SERIES 208i or other S/MUX-equipped audio interfaces including ADAT, or use it as a stand-alone front end.

Each SERIES 8p Dyna channel also features individually switched +48V phantom power for use with condenser mics, and an easy-to-use, single-control analog compressor with true bypass.

Features:

A Superior Front End for Studio and Stage
SERIES 8p Dyna

TASCAM has long been known for transparent, natural, ultra-low-noise preamps, and the eight TASCAM no-compromise HDIA (High Definition Instrumentation Architecture) preamps in the SERIES 8p Dyna are its best preamps yet; the noise level (EIN) is at -127dBu, the THD is 0.0007%, the dynamic range is 116dB, and the crosstalk is 119dB. Each SERIES 8p Dyna channel also features an easy-to-use, single-control analog compressor with true bypass for handling hot input signals and creating smooth audio input.

SERIES 8p Dyna
SERIES 8p Dyna
Versatile Inputs
SERIES 8p Dyna
SERIES 8p Dyna

With two instrument/microphone combo inputs on the front panel, you can quickly plug in mics, guitars, bass and more. Six balanced mic/line inputs grace the rear. Every microphone input has individually switched +48V phantom power for using different types of microphones such as Dynamic, Condenser, Ribbon and vintage for proper operation and safety. It adds up to a multi-purpose front end for recording and live sound.

SERIES 8p Dyna
SERIES 8p Dyna
Expand Your Interface or Other Device
SERIES 8p Dyna

Dual S/MUX optical outputs on the rear of the SERIES 8p Dyna enable you to use the unit as a front end expander for S/MUX-equipped audio interfaces, such as TASCAM's SERIES 102i and SERIES 208i, and Celesonic US-20x20. ADAT compatibility is also available. With two S/MUX outputs, you can send all eight SERIES 8p Dyna channels at up to 96 kHz (four channels at 176.4 or 192 kHz), dramatically expanding your system's capabilities.

SERIES 8p Dyna
SERIES 8p Dyna
Send to Anything
SERIES 8p Dyna

The SERIES 8p Dyna's eight line-level analog channel outputs are provided on both 1/4-inch balanced TRS connectors and balanced 25-pin D-Sub connectors. Route signals to interfaces, recording mixers, front-of-house consoles, and pretty much anything else. Connect its D-Sub outputs to a TASCAM ML-16D or ML-32D Analog Dante converter, and it becomes a pristine front end for an audio-over-IP network.

The Features Professionals Need
SERIES 8p Dyna

From its high-end preamps to its versatile outputs, the SERIES 8p Dyna is a thoroughly professional product, right down to its rugged metal 1U rack-mount enclosure. Word clock in and out BNC connectors with an In/Out/Thru switch enable proper synchronization of digital signals. Front-panel analog overload indicators, compression indicators, and digital peak and level meter bars let you monitor the unit's performance. Yet the SERIES 8p Dyna is simple to operate so you can stay focused on the task at hand.

SERIES 8p Dyna

Features at a glance:

  • Versatile, great-sounding front end for recording and live sound
  • 8 TASCAM HDIA (High Definition Instrumentation Architecture) microphone preamplifiers
  • Single-knob analog compressor with true bypass individually assignable to each input channel
  • 2 front panel instrument (Hi-Z)/microphone combo inputs
  • 6 rear-panel balanced mic/line inputs
  • Individually switched +48V phantom power per channel
  • Dual S/MUX optical outputs: 8 channels at up to 96 kHz; 4 channels at 176.4 or 192 kHz (ADAT compatible)
  • 8 line-level 1/4-inch balanced TRS analog channel outputs
  • 8 line-level balanced channel outputs on a 25-pin D-Sub connector
  • Word clock in and out on BNC connectors, with In/Out/Thru switch
  • Front-panel analog overload indicators, compression indicators, and digital peak and level meter bars
  • Rugged metal 1U rack-mount enclosure

Spec description

Sampling Frequency 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz
Quantization Bit Rate 24-bit
Analog Audio Inputs  
MIC IN (Balanced) 1-2 (when the input switch is set to MIC/LINE), 3 thru 8
Connector XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
Input Impedance 2.3kΩ
Rated input level  
GAIN: MAX -58dBu(0.001Vrms)
GAIN: MIN -6dBu(0.388Vrms)
Maximum Input Level +10dBu (2.45Vrms)
Gain Range 52dB
INSTRUMENT IN (Unbalanced) 1-2 (when the input switch is set to INST)
Connector 1/4" (6.3mm) TS jack equivalent (Tip: HOT, Sleeve: GND)
Input Impedance 1MΩ or more
Rated input level  
GAIN: MAX -58dBV (0.0012 Vrms)
GAIN: MIN -6dBV (0.501Vrms)
Maximum Input Level +10dBV (3.162Vrms)
Gain Range 52dB
LINE IN (Balanced) 1-2 (when the input switch set to MIC/LINE), 3 thru 8
Connector 1/4" (6.3mm) TRS jack equivalent (Tip: HOT, Ring: COLD, Sleeve: GND)
Input Impedance 10kΩ
Rated input level  
GAIN: MAX -48dBu (0.003 Vrms)
GAIN: MIN +4dBu (1.228Vrms)
Maximum Input Level +24dBu (12.282Vrms)
Gain Range 52dB
Analog Outputs  
ANALOG OUT (Balanced)  
Connector D-Sub 25pin, inch-screw No.4-40 UNC
Output Impedance 200Ω or less
Nominal Output Level +4dBu (1.228Vrms)
Maximum Output Level +20dBu (7.75Vrms)
Load Impedance 2kΩ or more
LINE OUT (Balanced) LINE OUT 1 thru 8
Connector 1/4" (6.3mm) TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
Output Impedance 200Ω or less
Nominal Output Level +4dBu (1.228Vrms)
Maximum Output Level +20dBu (7.75Vrms)
Digital Audio Outputs  
OPTICAL OUT (S/MUX)  
Connector OPTICAL (JEITA RC-5720C)
Signal Format Multi-channel Optical Format
(Supports S/MUX2: 88.2k/96k Hz, S/MUX4: 176.4k/192k Hz)
Control Input/Output  
WORD IN  
Connector BNC
Input Voltage 2.0Vpp to 5.0Vpp
Input Impedance 75Ω +/-10% with Terminal ON/OFF Switch
Frequency Deviation +/-100ppm
WORD OUT  
Connector BNC
Output Voltage 2.0Vpp (into 75Ω)
Output Impedance 75Ω +/-10% with OUT/THRU switch
Sampling Frequency 44.1k / 48k / 88.2k / 96k / 176.4k /192k Hz
Power DC 12V (dedicated AC adapter PS-P1230)
Power Consumption 16 W
Dimensions 482(W) × 44.8(H) × 228.8(D) mm
Weight 2.6kg / 5.7lb
Operating Temperature Range 0 to 40°C
Accessories User's manual(with warranty), AC adapter (PS-P1230)

 

Audio Performance

Mic amp EIN
(equivalent input noise)
-127dBu or lower
Frequency Response * JEITA
MIC/LINE to LINE OUT 20Hz to 40kHz, +/-0.5dB
40kHz to 80kHz, +/-5dB
MIC/LINE (analog) to digital output (S/MUX)  
Fs 44.1k/48kHz 20Hz to 20kHz, +/-0.5dB
Fs 88.2k/96kHz 20Hz to 40kHz, +/-0.5dB
Fs 176.4k/192kHz 20Hz to 80kHz, +/-5dB
S/N ratio * GAIN knob at minimum, JEITA
MIC/LINE/INST to LINE OUT 116dB
MIC/LINE/INST (analog) to digital output (S/MUX)  
Fs 44.1kHz 113dB
Fs 48kHz 113dB
Fs 96kHz 111dB
THD * 1kHz sine wave, maximum input level, GAIN knob at minimum
MIC / LINE to LINE OUT 0.0007%
INST to LINE OUT 0.0009%
MIC/LINE/INST to digital output (S/MUX) 0.001%
Crosstalk * 1kHz sine wave, GAIN knob at minimum
MIC to LINE OUT 119 dB
MIC to digital output (S/MUX) 114 dB

 

Documents:

Owner's Manual

Specifications